How Can I Increase the Power of My Electric Bike?

There are already very few methods of transportation that are as effective as riding an electric bike. Despite the limited energy consumption and low carbon footprint, this could meet the speed of a vehicle that is propelled by traditional means.

Your electric bike does have a gear that makes it faster in speed, and that is a positive sign. A higher KV motor or a battery with a higher voltage can help increase the electric bike speed, but all methods are equally effective.

You can also lower the amount of resistance your bicycle experiences by removing any unneeded components. It is possible to speed up a bicycle without paying an arm and a leg for the endeavor.

To find out the other most effective solutions for increasing the e bike speed read this article till the end.

What Is an Electric Bike?

Electric bikes are very similar to traditional bikes in several different ways. When the motor and batteries are taken out of the bicycle, the bicycle behaves in a manner that is comparable to what it had traditionally worked.

On the other hand, if an electric bike is equipped with a motor as well as a battery then it will help in assisting the e bike rider in the off-road as well as on-road situations.

e-bike power

What Are the Main Components of E Bike That Are Responsible for Increasing the Speed?

Three major components help in increasing the speed of an e bike.

1. Motor


3.Onboard Computer Display


The greatest part of the energy and speed that a bicycle possesses comes from the motor. The motor on an electric bike is largely dedicated to providing power to the wheels of the vehicle. The majority of electric bicycles get their primary propulsion from either a hub motor or a mid-drive engine.

Mid-drive motors are usually placed in the pedal component, whereas the hub motors are located in the front or rear wheel of the electric bike. In addition, the type of electric bike motor will also impact its noise level. So always check the motor type before buying an e bike.


If the engine is the heart of the bike, then the battery is its circulatory system.

The electricity that your battery produces is what enables the motor to move from the stopped position. Consequently, an older e bike battery will have less power as compared to the new battery.

Onboard Computer Display

Your electric bicycle includes an onboard microprocessor that is responsible for controlling the connection between both the engine and the charge. The technology that is built inside your bicycle acts as its brain and can track its overall effectiveness.

e-bike power information

Point To Be Noted

If you want to increase the speed of your e bike, one thing you should keep in mind is that many areas restrict the maximum speed of an e bike to 20 miles per hour. So, you should first check out the e bike laws in your area to avoid any consequences.

How Can I Increase the Power of My Electric Bike?

There are many things you can do to increase the speed of your electric bike. Read the mentioned ways to increase the speed of your e bike.

Always Charge Your Battery to Full Power Before Riding

That whenever a battery has been completely charged, its voltage output is at its highest possible level. The voltage of a battery will decrease in proportion to its decreasing capacity.

A fully battery-powered lithium-ion cell is capable of delivering 4.2 volts. Expect 3.6 volts of output at half-charge and 3 volts of discharge when the battery is entirely discharged. Your electric bike’s acceleration will be faster at 4.2 volts per battery than at 3.6 volts per cell.

If you wish to improve the speed of your e bike, make sure your battery is fully charged.

Adjust the Speed limiter of Your E Bike

The majority of electric bikes come with speed caps that are controlled by an inbuilt microprocessor. These caps are standard. Changing some factors, such as the size of the wheels, might “trick” the software into thinking that you are driving slower than you genuinely are.

This can be accomplished by changing the gear ratio. Because of this, you will be able to ride your bike at a faster pace.

Modifying the ratio of gear can accomplish this target. So, due to this, you will be able to ride your e bike much faster.

Detaching the limiter wire may also be an option for totally deleting the limiter. Your bicycle’s e-warranty may be voided if you do this.

Put Higher Battery Voltage

The most efficient method for significantly raising your speed is to raise the battery voltage, which is determined by the rotational speed of the engine. However, before upgrading your 36V battery to a 48V one, you ought to check to see whether or not the controller can deal with the additional power. Most are tolerant of a modest increase in voltage drops.

If you are not comfortable determining the voltage rating of the capacitors, it’s preferable to consult the controller manufacturer. If your controller cannot handle the higher voltage, you should not change the battery without first verifying.

Bear in mind that it is highly possible that the reading on your existing battery meter will no longer be accurate if you do not replace it with a new meter that has the appropriate voltage.

Use Gear Properly

When biking at a low velocity, lower gears are better to use, and when pedaling at a quicker speed, faster gears are usually easier to use. Therefore, to limit the amount of power drawn from the battery, you need to be sure that you are shifting into the gear that is suitable for the pace that you are currently traveling at.

If the rider of an electric bicycle shifts into a higher gear to increase their speed, the bike’s electric motor just might have to work even harder than is strictly necessary.

Adjust Your Speed Limiter

Most electric bikes come along with speed limiters.

If you have a speed limit installed on your motorcycle, you won’t be able to go faster than the legal limit. This function was added by the manufacturer specifically with your protection in mind.

By keeping count of the number of turns the wheels revolve within a given time, you may determine whether or not you are traveling faster than the posted limit.

Nonetheless, the options of the limiter can be altered to make the game operate at a faster speed. You can make the wheel smaller by adjusting the configurations on the settings menu, which is located on the back of the console. For instance, if the circumference of your wheels measures 66 cm, you have the option of modifying the limitation such that the wheels measure 40 cm.

The speed limiter will be fooled into thinking that your e bike has a shorter wheelbase than it does as a result of this, which will result in a more stringent speed limiter. If you want to go faster on your bike, you should take the maximum speed limiter off.

Examining the wiring diagram of the device is the most efficient method for locating the limiting wire that is connected to the controller.

Within this space, there is only a single cable that can be attached to any number of things. By removing these, you will be able to improve the maximum speed of your bike.

increase e-bike power

Use Lightweight Tire

It is a widely held belief that increasing the pressure in your tires would reduce their rolling resistance; however, this is not the case when driving on highways.

When climbing steep terrain, having the correct tire pressure is essential to effectively transfer the power from the motor to the surface below. If you lose grip or slide, your driving range will be limited.

For plus-size tires we recommend 0.9 – 1.3 bar and for wide tires we suggest 1.6 – 2.0 bar, although these numbers can differ slightly on how you ride and how much you weigh.

e-bike power motor

Try to Pedal During Accelerating

While pedaling an electric bike, the phase that consumes the most battery power is acceleration; as a result, even just a few seconds of pedaling can save fifty percent of the energy that you would have otherwise used.

This can help you save a significant amount of money on your power bill, particularly if you get stuck in traffic for a long time.

You can think of pedaling your e bike as a few seconds of free exercise that also enhances its range (and prevents you from having to pedal later when your battery runs out).

electric bike power

Go Easy on Throttle

The fact that riding an electric bicycle does not need any sort of strenuous physical effort is one of the most appealing aspects of this mode of transportation. However, if the battery is utilized in the mode that allows for maximum acceleration, its lifespan will be shortened.

The best strategy is to quicken one’s pace in a measured manner. As a direct consequence of this, the amount of energy drawn from your battery will be reduced, enabling you to go more.

Use Those Batteries That Have Lower Internal Resistance

Batteries of greater quality that are constructed for larger current outputs typically have lower internal resistance. Less resistance within the component results in a higher voltage output when it is subjected to load. When the current output of a battery is more than a predetermined amount, voltage sag will occur.

The most effective tactic is to progressively pick up the tempo as the game progresses. The lower the quantity of energy your battery has to operate with, the further you will be able to travel.

Because of their increased capacity, larger-capacity batteries are better able to withstand higher currents with significantly less sagging. If you upgrade to cells with a bigger capacity that are of the same quality, you will not only have a longer range but also a higher output voltage when the battery is under load.

Install a New Motor in Your E Bike

You also have the option to replace the motor on your electric bicycle with a more potent model. The larger the motor, the greater the increase in both its power and its speed. In addition to this, you need to ensure that your battery is capable of powering a more powerful motor.

By following this step-by-step guide, it is also possible to put an electric motor on a bicycle.

electric bike motor power

Use Thinner Tires

Another thing that can reduce the amount of drag that your tires are creating is to use thinner tires.

There is a purpose behind why racing motorbike tires are designed to have such a low profile. They can travel at a faster speed on the road although they are utilizing the tires, which would ordinarily restrict their speed on the road.

However, because electric bikes allow you to pedal with greater force, bigger tires like those on fat tire electric bikes have become more common. To ride on sand, you’ll need a bike with bigger tires like these. However, this means that your motor will be working harder to keep you going.

Tune the Electric Bike Brakes

A sluggish braking system on your e-speed bike can cause the bike’s speed to decrease.

Get a cheap bicycle multi-tool and learn how to adjust your brakes yourself (it’s simple) or visit a nearby bike repair shop and ask them to do it for you.

Reduce the Weight

If you want to move a larger load with your electric motor, it will demand a greater amount of force, which means it will consume more electricity. If you want to get the most out of your bicycle, you should carry as little weight as possible.

Some of the items in your luggage may be redundant, in which case you should probably think about getting rid of them.

Check the Brakes

The brakes could come loose while you’re pedaling, causing them to rub against the tire. This could happen at some point soon. The brakes will create additional friction even if you don’t want it, so you may have to pedal harder than usual to get the bike rolling.

Because of the potential impact it can have on the bicycle’s overall performance, the brakes should be subjected to routine inspections at regular intervals.

electric bike accelerator

Try to Oil Well Your Electric Bike

When it comes to gears, friction is the most significant factor that can reduce range. You do not want to experience a loss of power between the motor and the rear wheel as a result of the chain not running smoothly. It is of the utmost importance to maintain a clean and well-lubricated powertrain. After each ride, clean the chain with a dry towel and then lightly lubricate it with some chain lube.

Final Thought

Keep in mind that greater responsibility comes along with increased speed, so continue with extreme caution. Always be sure you’re following the rules of the road. It is strongly recommended that you wear a helmet.

Although going fast is a lot of fun, doing things at a more leisurely pace and savoring the experience of getting there could be a nice way to wind down the day.


I am Aman Dwivedi. I am a self-proclaimed e-bike enthusiast. I love nothing more than spending my days researching, testing, and writing about all things electric bike related. From the latest e-bike models to the best accessories and conversion kits, I am always on the lookout for new and exciting ways to get people riding electric bikes. Whether it's helping people find the perfect e-bike for their needs or sharing my latest electric bike adventures, I am passionate about getting more people riding electric bikes and loving it!

Recent Posts