If you have an electric bike, you need to maintain it properly. To avoid damage and to protect it from certain issues and problems. Every part of electric bikes needs maintenance for proper work and long-term use.
Taking care of an electric bike’s components requires many things and it will make your e-bikes run smoothly. Using an e-bike regularly while riding off-road and harmful weather conditions can affect your motor, battery, rear-wheel, brakes, frame, gears, bearings, system, pedals, ratchet, bottom brackets, braking power, sprockets, etc.
Many e-bikes require service on a routine basis to protect them from harm and dirt. Sometimes, if you do not take care of your electric bike’s range and batteries of your bike.
When you are washing your Bosch e-bike motors you must know which motor you are using and which model you have, or the type. You must know everything about your electric bikes. Maintenance is the essential part of maintaining your bike components.
Maintenance not only demands physical cleanliness and maintenance it also requires certain things that are the basic part of service.
How Many Times You Can Service Your E-bike:
Providers recommend servicing an electric bike. You can do the service by yourself or you can do it from service shops. There is no such difference between the service of traditional bikes and electric bikes. Every bike demands care and service. Similarly, e-bikes also demand service and care for proper use.
The cranks, chains, and sprocket are the components that require the most care in electric bikes. They enhance the performance of your bike and demand special care and maintenance. If you want to use your bike regularly with full efficiency, wash it often to protect it from harm.
The dirt or mud which covers your bike when combined with water and grease makes a more thick layer and affects the performance of the bike and causes its damage.
The more efficient your bike ride, the more components will remain forever. If your gears do not work properly it will affect your battery life and its efficiency. If you are traveling with the best clean, dirt-free drivetrain with the best smooth gears. It will help you to travel longer and have a happy ride.
The bike’s chain, crank arms, front sprocket, etc. are much affected by dirt and mud especially chain is the main component it becomes very much dirty, especially on mountain bikes. Due to these reasons, the e-bike battery and e-bike system are also affected.
Apply Lubricants and Grease:
It is very necessary to apply lubricants on the chain but it is also a difficult task to take someone’s help or activate walk mode if you have to apply grease on the chain to move it smoothly.
Always check the pressure of the tire also. If it is going to inflate soon try to change it so that you can save yourself from harm. These things can reduce your speed and efficiency and can affect the battery charge as well.
Use the proper pressure for a smooth ride and trouble-free ride on all kinds of bikes. Because the stability of the tire depends on the pressure of the tire.
Wear and Tear Components of the Bike:
Some parts are specially designed for riding the bicycle. They are manufactured strongly with full power and strength to balance the weight and other things of the bike. The drivetrains have different types of gear that assist you in a better ride.
The brakes, tires, and all other parts are designed with full strength and power for a better tour. If you want to do off-road riding, climbing, turning, hiking, etc. You all must check all the parts of the bike and if the components of the bike get damaged, always repair it as soon as you can.
If you use your bike regularly, check all the parts regularly, especially nuts, bolts, and axles whether they are properly tightened and fixed or not, and re-grease your chain after a few days for a better tour and journey.
If one part gets damaged, especially the chain it will cause harm to other parts as well. So always wear a chain cover to protect yourself from harm and trouble.
Washing Your Electric Bike:
It’s already discussed that care and washing are the essential parts of keeping your bike long. Here are some things that are needed to wash your bike.
Safety of Battery and Motor While Washing:
The batteries and motors are the essential part and they are sealed inside the bike. Don’t wash your bike with the full pressure of water. Always wash it with a soft cloth and low pressure so that water goes to the motor and battery otherwise don’t you will be stuck in a big problem.
Wash your electric bike with a soft cloth, brush if you want to remove dirt and mud, and a little amount of water for safety and to remove dirt.
E-Bike System Connection:
Always seal all the connections of the bike if they are not sealed and turn off the system of the bike so that you can work properly.
Always check the ports of the charger if they have any dirt so remove it with a dry cloth or with a brush to remove every dust particle. But turn off the charging port while cleaning it.
Keep It in Dry Place:
After washing it, keep it in the dry place to dry it completely, and don’t use any oil or cleanser for the brakes because it will cause harm to the bike.
The connections of the battery and its nearby area also need to be cleaned. Use all the areas with a soft cloth or brush to remove dirt from that area. If your bike has another battery for the longer rides, always remove the connection of that battery and clean their connections with a soft cloth.
The bike has a speed magnet as well on the wheel side. Clean that sensor with a soft cloth to protect them from harm.
As we know the battery and motor are the sealed part of the bike. But don’t clean the motor because they are already sealed from the factory but clean the other connection which is present near the battery and motor areas.
If you accidentally wash these parts you will face a big problem. If you face a problem with the motor e-bike systems visit the shop from where you buy your bike and complain to the dealer about this kind of circumstances.
Enhance the Range of the E-Bike Battery:
If a ride enhances the range of the battery, consider these things while you ride on your bike.
Ride With High Cadence:
If you ride your bike with a high cadence, it is good for your bike and it will make it efficient and effective instead of riding on a slow cadence.
Reduce Weight on the Bike:
Don’t use much weight and don’t put a higher load on the bike it will damage the stability of the battery.
The Efficiency of the Ride:
Try to use smooth roads for the ride and try to reduce the brakes less to avoid your bike damage from the very big issue.
The Pressure of the Tire:
Traditional bikes use the normal range of pressure to control your bike balance and grip. Otherwise, it will cause problems with your bike.
Some e-bikes have a system that tells you the battery charging and its compatibility so consume your battery charging according to that system reading.
If you ride at a low temperature, it will affect your battery and cause harm to your battery. Always ride in mild and hot temperatures to avoid your bike from harm.
Battery Storage and Protection:
As the batteries are sealed but also require some cleanliness there are many methods to keep your sealed battery protected and clean.
The lithium batteries easily dissolve and start reducing their capabilities with time. If you treat them properly and check them on a daily basis they will remain longer and more durable.
Care and Cleanliness of the Battery:
The services are provided to the bikes to keep them durable and to enhance their life span. If you turn off the connection of the battery, you can clean it with a clean and soft cloth. After that, clean it with a dry cloth to make it clean and free from dirt.
Use and grease it gently and don’t use any washer or with a hard cloth or hand it will cause harm to the bike. Clean it but with gentle hands. Don’t use gel or anything, it will damage your battery.
Methods for charging and Storage:
Recharge your e-bike battery at normal temperature and place them in a dry place. If you want to keep it for a longer time, don’t charge for too long or don’t leave it on charge for hours.
When the bike is not in use for many days, turn off its battery connection. It will lose its charging whenever you again want to charge its battery, and then you can use it again.
According to the Bosch e-bike designers, they said don’t fully charge your battery. It will harm the life of the battery. Charging it above 50 percent or lower than 70 percent this charging is good for long-term rides.
Extreme temperature either hot or cold can badly affect battery power and durability. Always keep your battery in a dry and low-temperature place.
At the time of the winter season, charge your battery at the normal temperature and then again insert it on the bike and then you can go on the ride. The last option for damage is to replace your battery with a new one.
Always use the right charger of the same model, charger plays a very important role. It is necessary to use a good charger otherwise it will harm your battery. If you use the wrong charger it will harm your bike and battery. Service your electric bike every day.
It is necessary to update the software of your bikes. Some need it regularly while others require it frequently. Some apps and software updates help you to indicate the performance and all the necessary information about your bike. It keeps you updated with each and everything about the bike.
If you set the setting of the power, it will help you in regulating the battery and speed range of the bike.
if you set the setting of the output, it will help you to travel longer on the charging. This will consume charging slowly and helps you for a longer ride.
There are more updates available on the website to update you with firmware update updates about the bikes. Some branded apps help you to be aware of each and everything about your bike. Continuous inspection is required for proper use.
If you have the battery and system of the best brands, it will firmware update you about everything. This will enhance torque power, battery durability, and other upgrades to the bikes. So keep checking your apps. It will indicate everything.
If your battery or motor power indicates you with any harm or error, talk to the dealers. This will resolve your problem as well.
Essential Maintenance of Electric Bike:
Maintaining your bike and its parts can enhance its span and durability and will help you to move longer by giving you the best facilities for the bike ride. But in case of harm, repair or fix your components with new ones.
There are some top things about maintenance for the bike’s durability and performance.
Always check the parts that need to be repaired and check either nut, bolt, or loose spokes that are lubed and fixed properly.
Do not charge your battery fully and keep them at normal temperature.
Charge your bike with the right and durable charger.
Always check the updates of the software and apps.
Don’t fix damaged components to be fixed by yourself, always go to dealers for the fixing of damaged parts.
For protection and harm stand your bikes in the garage.
Does cold temperature harm electric bikes?
Yes, cold temperature is harmful and it will affect the performance of the bike.
Is a Software update necessary or not?
Yes, it is very necessary because it will tell you everything about your bike. If you don’t update it, it will not indicate you from any harm or performance.
When you consume a high cost on the bike then it is necessary to care for them properly with full protection and maintenance. It is not easy to clean the delicate parts of the bike but you should consume your time and efforts to clean every component of your bike. Check them regularly and keep updating their software for performance and other use.